D-Ringe | Pet Hardware® (2024)

FAQs

What is the D-ring on a dog harness used for? ›

The front D-ring harness is an innovative tool for managing dogs during walks. It prevents dogs from lunging forward, minimizing the risk of injuries. Exercise caution in usage, ensuring correct fitting and adherence to intended orientation.

Standard collars are designed like a man's belt. They usually have a metal "D" ring where you can attach a leash. It's your classic and most common dog collar design. Center-Ring / O-Ring collars have a metal ring in the middle which allows the collar to flex more than the material alone would naturally.

O-Ring and D-Ring are required for adjustable and multifunctional types of leash since they allow for quick length changes or a new style.

The Dee Ring on the collar and harness is used to attach the leash to your dog. There's a reason it's shaped like a “D” and not an “O” or other letter of the alphabet: it provides maximum comfort for your dog, while offering the best method of connection and quick release from the trigger or bolt snap.

The back D-ring is where you attach your lead all of the time. The front D-ring is designed for use in conjunction with a double-ended lead or two leads, attached to both the back and front of your dog to enable greater control and to distribute any pulling force more evenly.

D-rings are shaped like the letter "D" and have a flat base with a gap in the centre where the strap or belt is threaded through. They are a better option for thinner leather products such as wallets or keychains, as they do not add as much bulk as O-rings.

Ring style

Although O-rings are the most common, they do have a lower sheet capacity. For larger projects, you may need to consider a D-ring, which is offset to the back cover and can may using the binder easier to manage while reducing stress on individual pages.

The dorsal D-ring is the main attachment point for lanyards, vertical lifelines, and retractables. So when a fall occurs the D-ring on your back will be the one holding you. There is one small note about the dorsal D-ring though. You should never have more than one of anything hooked up to it at a time.

The center ring gives the collar more flexibility to move than a standard collar. Some owners also like to attach their leash clip directly to the center ring during walks since it usually sits right on the back of your dog's neck, making it a convenient quick leash attachment point.

The Transitional Leash works by applying gentle pressure on your pup's nose - a natural pressure point. So when your dog pulls, rather than yanking and straining their tracheas on a flat collar, it just puts a bit of pressure down gently on their snout to help keep your dog calm and focused on you.

What ring do you attach the leash to prong collar? ›

There are two ways to attach a leash to the prong collar. It can either be connected to the live-ring or the dead-ring. Which one you choose will depend on the dog and what you are trying to do. Leash that is attached to the live ring on the prong collar.

D Ring/O Ring

A D Ring is "fixed," or riveted in place at the base of the handle, while the O Ring is "floating," or loose on the handle. A fixed D Ring is the most popular selection here, though some prefer a floating O Ring if they are planning to connect two leashes together.

UpFront D-Ring Attachment

The UpFront™ is a D Ring Attachment point that transforms your EzyDog Convert or Express Harness into a training harness. The front lead anchor helps maintain control of your dog, reminding them that you're in charge.

The term O Ring is sometimes used to refer to collars as well (contrasting with D-ring collars). In this context it can describe a collar with one large ring for fastening. Collars featuring such rings are often worn by submissives to indicate that they are in a steady relationship.

Sternal D-Rings: The sternal or chest D-Ring is suitable for fall arrest, fall restraint, retrieval and rescue applications. Side D-Rings: These are appropriate for work positioning when used as a pair, plus restraint applications.

By having the leash clipped to the front of the harness, your dogs neck or back will not be pulled, even if they try and walk ahead. Using the front D-ring helps alleviate some of the potential stress associated with having a least attached to the back or using a neck collar.

Like the dorsal D-ring, the sternal D-ring should fall squarely in the center of the chest, at the sternum or breastbone. This positioning ensures the harness is able to distribute the worker's weight evenly and safely in the event of a fall.

In general, a dog harness should fit snug, but not too tight. It should be tight enough that your dog can't back out of it, and the ring (that you clip the leash to) should sit higher on their chest. Just like with a collar, you should be able to fit two fingers (but only two!) between the harness and your dog.